Easily remove printouts

latest invention patented by CoLiDo

An old problem

The melted ABS/PLA filament will stick firmly to the build tray when it has cooled down. It was not easy to remove the print object from build tray. You needed various tools – knife, cutter, hammer, etc. to scratch the tray surface or even destroy the whole tray to get your printed 3D objects. This would create and require that you use a new build tray after each print job. In many cases a build could get broken especially if the build consisted of very thin or small parts.


A new solution

Now CoLiDo has found the solution – Anti Sticky Glass Platform. This advanced 3D printing solution allows for an easy removal of printed 3D object with careful, prudent and never wasteful. Coated by a special material on the platform, which can prevent the melted ABS/PLA from sticking to it. You would never got a incomplete printed 3D object simultaneously can save more precious time for pursuing your ideal printing work instead of tackling the core.

CoLiDo will show the temperature of the platform on its one-button control panel.  After the platform has cooled down (usually in a few minutes after the print job is done), you can remove the printed 3D objects with your bare hands directly.  If you find some waste remaining on the platform, you can clean it simply by using a cloth.

With CoLiDo’s glass platform technology, 3D printing is no longer a technical job

See details of CoLiDo 3D printers>