Printing 3D Objects at Home
CoLiDo 3.0 is perfectly stable and secure to home or office. With full technical support allows you turn your colorful ideas and designs intoreal items in education, industry and engineering or design. It features CoLiDo’s patented glass platform, which is coated in a special material that prevents PLA, ABS or TPU prints from sticking to it. Once your printed object has cooled down, you can simply remove it with your bare hand. CoLiDo enable everyone to enjoy the beauty, creativity and utility of 3D printing.
Light weight, low noise level and odorless make CoLiDo 3.0 suit perfectly to home or office.
- The only 3D printer brand allows toolless print object removal – SIMPLY BY YOUR HAND!
- Large build size – 8.9″ x 5.7″ x 5.5″ (22.5 x 14.5 x 14cm)
- Clean and easy to use
- Very high print quality and smooth build surface – up to 0.1 mm resolution
- Small, light weight, quiet and odorless
What’s in the box:
- CoLiDo 3.0 3D printer
- 500g PLA filament
- SD card and card reader
- PLA and ABS patented glass plaform
- 3D printed samples
- User manual
- Other accessories
WARNING: This 3D Printer – when used with a styrene filament (ABS / HIPS / PC-ABS) – can expose you and others in the same room to styrene, a chemical known to the State of California to cause cancer. www.P65Warnings.ca.gov
ALWAYS OPERATE THIS PRODUCT IN A WELL-VENTILATED AREA.
Product Features
Patented glass platform – remove your printed object simply by your hand
CoLiDo’s patented glass platform allows for easy removal of printed objects. The platform is coated with a special material which can prevent any melted ABS/PLA/TPU from sticking to it. CoLiDo 3.0 Wifi will show the temperature of the platform on its control panel. After the platform has cooled down (usually a few minutes after the print job is done), you can remove the printed object with your bare hand directly. If you find some waste remaining on the platform, you can simply clean it simply with a cloth.
Optimum build size – 22.5 cm x 14.5 cm x 14 cm
CoLiDo 3.0 Duo has an optimum build of 225 x 145 x 140 mm. The size can cover most of the daily use products.
High print quality – up to 0.1 mm layer resolution
CoLiDo 3.0 has print resolution up to 0.1 mm – the highest resolution among the same level FDM 3D printers. Supported by the high quality CoLiDo filament, CoLiDo 3.0 Wifi can build fine, smooth and accurate 3D objects which outscore the 3D printers from other brands.
One-button control panel
You can use the one-button control panel to control the CoLiDo 3.0 3D printer. Most printing functions and settings are listed in the panel so you can fully operate the printer using only the panel.
Connect through SD card or USB
You can connect the CoLiDo 3.0 through USB or SD card. Using SD card can free your computer so that it does not need to be connected to the printer all the time.
Transparent case
The transparent case is not only sleek and modern, which blends in well with any home and office decor, but it also let you see clearly the entire printing process of CoLiDo 3.0 Duo.
Low noise level
CoLiDo 3.0 has only 45dB noise during printing. The low printing noise will not affect your daily life, so you can even print while you sleep.
Light weight
CoLiDo 3.0 is only 12kg. Its weight is so light that you can put it on any tables at home or in offices, and change the location anytime you want.
