Large build size – 30 cm x 30 cm x 45 cm
CoLiDo X3045 has the largest build size among all CoLiDo 3D printers. The build size 300 x 300 x 450 mm allows industrial users to print most of their products, parts or tools.
Patented glass platform – remove your printed object simply by your hand
CoLiDo’s patented glass platform allows for easy removal of printed objects. The platform is coated with a special material which can prevent any melted ABS/PLA from sticking to it. CoLiDo X3045 will show the temperature of the platform on its control panel. After the platform has cooled down (usually a few minutes after the print job is done), you can remove the printed object with your bare hand directly. If you find some waste remaining on the platform, you can simply clean it simply with a cloth.
High print quality – up to 0.1 mm layer resolution
CoLiDo X3045 has print resolution up to 0.1 mm – the highest resolution among the same level FDM 3D printers. Supported by the high quality CoLiDo filament, CoLiDo X3045 can build fine, smooth and accurate 3D objects which outscore the 3D printers from other brands.
One-button control panel
You can use the one-button control panel to control the CoLiDo X3045 3D printer. Most printing functions and settings are listed in the panel so you can fully operate the printer using only the panel.
Connect through SD card or USB
You can connect the CoLiDo X3045 through USB or SD card. Using SD card can free your computer so that it does not need to be connected to the printer all the time.
Stable and reliable
CoLiDo X3045 uses metal case which can make the printer stronger and stable. This minimizes the shaking during printing and keeps the print head pointing to the correct position. This is vital for a fine printout.